CONTROLLER 4150K FISHER

4150K and 4160K Series Pressure Controllers and Transmitters Specifications Available Configurations ( See table 1) Input Signal( 1) Type: _ Gauge pressure, _ vacuum, _ compound pressure, or _ differential pressure of a liquid or gas Output Signal( 1) Proportional or Proportional-Plus-Reset Controllers and Transmitters: _ 0.2 to 1.0 bar ( 3 to 15 psig) or _ 0.4 to 2.0 bar ( 6 to 30 psig) pneumatic pressure signal Differential Gap Controllers: _ 0 and 1.4 bar ( 0 and 20 psig) or _ 0 and 2.4 bar ( 0 and 35 psig) pneumatic pressure signal Action: Control action is field reversible between direct ( increasing sensed pressure produces increasing output signal) and _ reverse ( increasing sensed pressure produces decreasing output signal) . The suffix R is added to the type number of a construction specified for reverse action. Supply and Output Connections 1/ 4- inch NPT female Proportional Band( 1) Adjustment For Proportional and Proportional-Plus-Reset Controllers: 0.2 to 1.0 bar ( 3 to 15 psig) Output: Full output pressure change adjustable from 3 to 100% of the sensing element range. 0.4 to 2.0 bar ( 6 to 30 psig) Output: Full output pressure change adjustable from 6 to 100% of the sensing element range. Differential Gap Adjustment For Differential Gap Controllers: Full output pressure change adjustable from 15% to 100% of sensing element range Reset( 1) Adjustment For Proportional-Plus-Reset Controllers: Adjustable from 0.01 to 74 minutes per repeat ( 100 to 0.01 repeats per minute) Zero( 1) Adjustment ( Transmitters Only) Continuously adjustable to position span of less than 100% anywhere within the sensing element range Span( 1) Adjustment ( Transmitters Only) Full output pressure change adjustable from 6 to 100% of process sensing element range Performance Repeatability( 1) : 0.5% of sensing element range Dead Band( 1) ( Except Differential Gap Controllers( 2) ) : 0.1% of output span Typical Frequency Response at 100% Proportional Band. Output to Actuator: 0.7 Hz and 110 degree phase shift with 1850 cm3 ( 113 inches3) volume actuator at mid-stroke Output to Positioner Bellows: 9 Hz and 130 degree phase shift with 0.2 to 1.0 bar ( 3 to 15psig) output to 33 cm3 ( 2 inches3 ) bellows Ambient Operating Temperature Limits( 3) _ Standard Construction:  40 to 93_ C (  40 to 200_ F) _ 4160KF ( w/ Reset Relief) :  40 to 71_ C (  40 to160_ F)